© Serendigity (Flickr) Floor Sanding
© Serendigity (Flickr)
Overview
Tiles are now the requirement of every household when it comes to decorating the interior and exterior of a house. Every room is now loaded with tiles which assist in upgrading the beauty of a house.
You can easily learn to lay floor tiles by following these steps:
The floor tiling should be set out from the centre of the floor so that there are no cuts in the inner areas.After spreading the area with adhesive using a notched floor trowel, press the tile firmly to check if it is place.After laying the tile, you should check whether the tile has been properly inserted or not.
You can check same using the trowel and lifting the tile.The adhesive must be evenly applied on the tile and on the base to ensure firm placement.You should ensure the regularity of the tile with the wall by taking accurate measurement and cutting wherever required.To set the vinyl floor tile on the edge, take the measurement by placing the tile upside down and after marking cut the tile from the same.To cut the floor tiles use a tile cutter and handle it carefully to avoid cuts.
You should wear protective goggles during the cutting procedures. The awkward shaped tiles can be cut using tile nippers, especially those to be laid around the pipes.24 hours after the work, when the adhesives dries, it is time to spread the grout all over the area. Take care of the joints while grouting with the help of spreading tool and the excess grout can be cleaned using the manufacturer’s instruction. Conclusions
These steps will make the work of tiling the floor much simpler and easier for you, so that you can perform all by yourself. So, enjoy tiling.